Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

Avid Avid Overcoat Noodle
$8.99
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
Bontrager Brake Cables
$9.98
- Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free
Campagnolo Brake Cable And Housing Set
$90.00
- 11-Speed brake & shift cable/housing set - Special 4.1mm derailleur housing for reduced friction - Everything you need for a Campy-equipped bike in one simple kit - Fits all Campagnolo Ultra-Shift, Power-Shift, Ergopower, Time Trial and Flat bar systems - Includes 4 cables, housing & ferrules - Cable Head: Road - Diameter: 1.2 mm - End Type: Campy - Housing Diameter: 4.1 mm
Dia-Compe Straddle Cable Carrier
$17.99
- Aluminum straddle cable carrier for cantilever brake
Dia-Compe Ferrules
$38.19 - $39.99
- Dispenser of chromed ferrules
Dia-Compe Cable Tips
$40.99
- Dispensers of alloy cable tips
Hayes El Camino Compression Fittings
$22.99
- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper
Hayes Hydraulic Tubing Kits
$41.99 - $44.10
Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems
Jagwire Basics Road/MTB Brake Cable
$2.99
Basics brake cables provide value on a budget. - Pre-stretched - double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
Jagwire Sport Slick Galvanized Mountain Brake Cable
$4.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation
Jagwire Sport Slick Galvanized Road Brake Cable
$4.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm
Jagwire Basics Derailleur Cable
$4.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Jagwire Basics Tandem Brake Cable
$4.99
Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm
Jagwire Sport Slick Stainless Mountain Brake Cable
$5.49 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
Jagwire Sport Slick Stainless Road Brake Cable
$5.49 - $16.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Jagwire Grub Seals for Elite Sealed Kits
$5.99
Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces
Jagwire Sport Slick Galvanized Shift Cable
$5.99 - $7.99
Jagwire's Shift Inner Wire is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
Jagwire Basics Brake Cable And Housing Assembly
$6.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake
Jagwire Basics Shift Cable And Housing Assembly
$6.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
Jagwire Universal Cable Tips
$7.49
Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.
Jagwire Wire Hook - E-Shift & Brake
$7.49
- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake
Jagwire Sport Slick Stainless Shift Cable
$7.99 - $14.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Jagwire Aluminum Housing Connectors
$8.99
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4, 4.5 and 5mm diameter. Match the diameter of the housing sections on your bike.
Jagwire V-Brake Boot
$8.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
Jagwire C-Clips
$9.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
Jagwire Frame-Mount Adjusting Barrels
$9.99
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
Jagwire Mini Tube Top Frame Protectors
$9.99 - $69.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
Jagwire Sport Slick Stainless Mountain/Road Brake Cable
$10.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
Jagwire Universal Pro Non-Crimps
$10.99
Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.
Jagwire Lever Side Protector
$11.99
Jagwire Disc Brake Hose Parts Protectors
Jagwire Pro Slick Polished Stainless Brake Cable
$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Pro Slick Polished Stainless Shift Cable
$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Shift Inner Wire, 1.1mm Teflon, Slick, Stainless
$11.99 - $16.49
Jagwire's Shift Inner Wire is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.
Jagwire Open End Caps for Brake Housing
$12.99 - $60.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
Jagwire Slick-Lube Liner for Elite Sealed Brake Kit
$12.99
Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners
Jagwire Slick-Lube Liner for Elite Sealed Shift Kit
$12.99
Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners
Jagwire Stick-On Cable Guides (Pack of 4)
$12.99
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
Jagwire 5mm Anchor Bolt
$13.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
Jagwire Cable Guide Stopper 5mm
$13.99
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.
Jagwire EZ Handle Single End Straddle Wire, 1.8 x 330mm
$13.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
Jagwire Rotating S-Hook
$13.99
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings
Jagwire Rotating S-Hook For Electronic Shift Wire And Mechanical Brakes
$13.99
Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire
Jagwire Straddle Cable Carrier
$13.99
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
Jagwire Sport Inline Adjusters
$14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
Jagwire Double-End Straddle Cable, 1.8 x 380mm
$15.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
Jagwire Ez-Bend Housing Segments For 5mm Pro Compressionless Brake Housing
$15.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars
Jagwire Mickey Adjusting Barrels
$15.99
Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.
Jagwire Inline Index/Detent Adjusters
$16.50 - $16.99
Jagwire's Inline Index/Detent Adjusters are installed by cutting the front sections of shift housing and inserting them between the two housing pieces to join them again. Once in place, the Inline Adjusters let you fine-tune the shift cable tension by hand, and even while riding, to dial-in your front and rear shifting. You simply turn the knurled center barrels on the adjusters by hand to tighten or loosen the cable tension.
Jagwire Cable Grips
$16.99 - $17.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
Jagwire M7 Adjusting Barrel
$16.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire Sport Direct Rocket II Cable Tension Adjusters
$16.99
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm
Jagwire M6 Adjusting Bolt
$17.99
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
Jagwire Alloy Straddle Cable Carrier w/Liner
$18.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
Jagwire Mountain Pro Disc Brake Hydraulic Hose Quick-Fit Adaptor
$19.99
Mountain Pro Quick-Fit kits allow the easy installation of Jagwire hose with Shimano disc brakes. Kits contain enough hardware for both front and rear brakes, Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation. Compatible with: Shimano Deore M596, M615
Jagwire Mountain Pro Quick Fit Adapter (SRAM/Avid)
$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Jagwire Mountain Pro Quick Fit Adapter (Shimano)
$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation - Compatible with Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355
Jagwire Mountain Pro Quick Fit Adapter (Shimano)
$19.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Jagwire Pro Dropper Cable Kit
$19.99
Dropper seatposts are quickly becoming standard equipment on mountain bikes across the globe, and for good reason. While most droppers use traditional shift cables and housing, the Jagwire Pro Dropper Kit is the first cable and housing system designed from the ground up to ensure they work as well as possible. The included dropper-specific 0.8mm Pro Polished stainless inner cable interfaces seamlessly with remote levers and actuator arms to provide effortless cable movement. And the innovative FLEX-SL housing is more flexible than standard shift housing, allowing for easier installation with internally-routed seatposts and providing smoother cable movement. With all needed parts included, Pro Dropper Kits are simple to install. - Pro Polished cables combined with improved Slick-Lube housing liners offer enhanced remote lever feel and long-lasting performance - Kits include all the parts and enough housing to install with either internally or externally routed seatposts - Includes heat-shrink shims for use at the cable clamp to ensure compatibility with most cable-actuated seatposts and remote levers - Flexible housing construction improves performance with internal routing and tight housing bends - 0.8mm cable and FLEX-SL housing are for use only with dropper seatposts What's Included: - 1x 1700mm FLEX-SL Dropper Housing - 1x 2000mm Pro Polished Dropper Inner Cable - 2x Sealed Alloy End Caps - 2x Lined Alloy End Caps - 1x Heat-Shrink Shim - 1x Cable Tip - 1x 5G Tube Top - 1x Rotating Hook
Jagwire Housing Extension For Link Shift Or Brake Kit
$20.99
Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each
Jagwire Pro Indexed Inline Cable Tension Adjusters
$20.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems
Page 1 of 3 Next page