Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$34.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$40.00
Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system.
Diameter / Width
- 26" — 23mm-559 PV
- 26" — 25mm-559 PV
- 650b — 31mm-584 PV
- 650b — 39mm-584 PV
- 29" — 23mm-622 PV
- 29" — 25mm-622 PV
- 29" — 31mm-622 PV
$8.99 - $39.99
A new standard in tubeless sealant.
Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims.
Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride.
- Non-latex ammonia-free formulation
- Kevlar reinforced Fiberlink mesh seal
- Seals up to 1/4" punctures
- Can be used in extreme temperatures, down to -10 degrees Fahrenheit
$10.50 - $14.99
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$14.99 - $15.29
• Integrated presta valve extension
• Machined alloy construction
• Available in 30mm, 50mm, and 70mm
• For use with inner tube with removable Presta valve core
$20.00
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves.
- Constructed of lightweight aluminum
- Removable valve core
- Mated with a seal which is specific to different rim models:
- MY14 Control SL = black rim bed shaped seal
- MY15 Control Carbon/Aluminum = red rim shaped seal
- MY15 Traverse SL/Aluminum = black O-ring seal
$20.99 - $35.00
- Fully removable aluminum valve
- Anodized red color
- Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes
- 42mm, 60mm, 80mm, and 110mm lengths
- Sold as a pair
$9.90 - $14.99
• External presta valve extensions for deep dish rims
• Machined alloy construction
• Available in 30mm, 50mm, 65mm, and 70mm lengths
$19.99 - $29.99
High-quality alloy valve extension, perfect for tubes with removable valve cores. Each extension has a rubber seal for an excellent seal. These are a great investment, as they can be used time and time again.
- For removable valve core inner tubes
- High quality and reusable
- Air-tight seal to prevent leaking
- Vittoria etched logo
$14.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves.
- For use with threaded Presta (non-removable core) tubes
- Knurled end to keep pump from slipping
- Available in all lengths to match all Zipp wheels
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$29.99 - $34.99
- The same tubeless valves, now with a Tire Insert air flow system
- 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts
- Upgraded to aircraft grade 7075 aluminum valve stem and cap
- 4mm machined Allen Key slot for easy installation/removal
- Valve core removal tool integrated into valve cap
- Includes multiple rubber bases to optimize fit with multiple rim types
$16.00
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag.
- For use with Whisky tubeless rims and most others
- 40mm length
- Fits up to a 8mm valve hole
- Removable valve core
- Sold as a pair
$9.00 - $14.99
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
$8.00 - $140.00
$8.00 - $140.00
Up to 31% Off
Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts.
- Proven by our Factory Team Athletes.
- Seals punctures up to 6mm.
- Performs in a wide temperature range (-20° – 70°C).
- Works in latex inner tubes inside tubulars.
- Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts.
Recommended sealant amount per tire:
- Road: 24-32mm - 30-40ml
- Open Road: 33-50mm - 50-70ml
- MTN: 2.0-2.3" 80-100ml
- MTN: 2.4-3.0" 100-125ml
$9.99 - $139.99
$9.99 - $153.99
Up to 9% Off
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$24.00
- Tubeless Valve compatible with Stan's ZTR rim
- Sold as a pair
$7.99 - $23.99
Endurance formula lasts twice as long as standard Orange Seal.
- Premium Latex coats the whole casing, from tire bead to tread cap
- Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites
- Developed to add as little weight to a tire as possible
- Made of eco-friendly biodegradable ingredients
$25.00
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve.
- Made from CNC machined from 6061 T-6 aluminum, anodized black
- Tapered rubber collar permanently bonded at the sealing interface
- The valve core can be removed to add tire sealant
- Valve locknut with o-ring seal and valve cap are included
- Sold as a set
An engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim
- Absorbs impacts, reduces vibration and adds lateral stability to the tire
- Third party testing has revealed that, compared to a standard tubeless setup, Cush Core provides a 12% smoother ride, 35% more sidewall stability, 16% less suspension travel consumption, 3% less rolling resistance, and 50% less impact force transferred to the rim
- This system is designed to be used with tubeless ready or tubeless converted mountain bike rims and tires, as well as standard tubeless sealant
- Doesn't absorb sealant like other tire inserts on the market
- Includes special tubeless air valves that allow air to move through the valve without becoming obstructed by the insert
$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$6.99 - $21.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$8.00 - $40.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$65.00
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$9.99 - $15.00
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$6.49
Precision-machined aluminum bicycle valve stem caps. Elegantly engineered, their tip boasts a built-in valve core remover while also functioning as a T25 Torx bit.
Built from CNC-machined from durable aluminum and anodized for long-lasting sheen, the CNC TLR Valve Caps fit all common Presta valve stems with threaded tips. Sold as a pair.
$149.00 - $150.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes:
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions
$19.00 - $23.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes.
- Available in a number of lengths and colors to perfectly fit your rims and your sense of style.
- Includes two valves
$9.99
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims.
- Over-sized design provides extra torque when tightening
- CNC-machined from AL-6061 aluminum
$14.99
Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.
$24.99 - $25.00
Zipp’s Tangente Integrated Valve Extenders and Wrench Kit provides you with three Presta valve core extenders (you choose the length) and a nice set of Zipp wrenches to install them in your tubes or tires that feature removable valve cores (and your spare, too!). With this kit you can change out too-short valves to longer ones so that your tubes/tires have valves long enough to work on wheels with deep rims. The Zipp extenders have a seal inside to stop air leaks, too.
Page 1 of 2
Next page