More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
The SRAM RED eTap rear derailleur executes shifts the instant you demand it, with military precision. Wirelessly. It’s easy to set up, clean in appearance and delightfully uncomplicated. Mechanical necessities such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - Compatible with SRAM RED eTap shift/brake controls - Max tooth size: short-cage - 28T; mid (WiFLi) cage - 32t - SRAM RED eTap shifting logic - Wireless connection via AIREA network for fast and clean installation - Exact Actuation provides precise gear selections - Designed to work with SRAM PowerGlide and PowerdomeX cassettes - Speeds: 11-speed - Weight: 239 grams (short cage with battery) - Outer Cage: Carbon - Compatibility: SRAM RED eTap, PowerdomeX & PowerGlide Cassette - Inner Cage: Carbon - Finish: Black - Pulleys: Ceramic - Pull: Exact Actuation
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX817 Di2 version offers the digital precision of Shimano electronic shifting, as well as synchronized shifting and is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T
$299.99 - $310.00
It takes a degree of passion for the sport that can’t be faked to fully appreciate SRAM RED. It was created to blur the boundaries between machine and athlete. The SRAM RED rear derailleur was designed with Exact Actuation technology for precise, efficient shifting. Carbon fiber, titanium, and ceramic bearings complete the spec. The result adds to its legacy as the heart of the purest groupset for the pursuit of cycling excellence. - SRAM 11-speed compatible - WiFLi option - Carbon cages, carbon inner links, titanium hardware - Exact Actuation shifting provides fast and accurate shifts - Silent shifting with optimized AeroGlide pulleys, ceramic bearings - Spring-fixed barrel adjuster - Chain pulley cage adds precise chain management - Titanium pinch bolt keeps a low profile while minimizing weight - Speeds: 11 - Material: Carbon cages, Carbon inner links, Aero designed titanium hardware - Weight: 145 grams short cage), 165 grams (mid cage) - Compatibility: SRAM RED & Force Rear Shift-Brake levers, SRAM R2C Aero SL-1190 shifters, - SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Finish: Falcon grey & black anodized - Tech Highlights: AeroGlide Pulleys, Exact Actuation - Largest Cog (teeth): 28 (short cage) 32 (WiFli Medium Cage)
$299.00 - $310.00
SRAM's RED 22 Rear Derailleur boasts exceptionally low weight and fast and accurate shifting through 11 gears. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels deliver extra quiet operation. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Light, fast, and quiet, the RED 22 derailleur delivers!
This derailleur not only answers the Eagle drivetrain’s need for greater capacity, but is also the next evolution of SRAM's proven, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley, allows 10- to 50-tooth cassette capacity in this compact design, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. A redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability.
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
From XC to enduro, SRAM's renowned X0 Type 2.1 Rear Derailleur is a rider's and racer's dream. Expertly crafted from carbon, titanium, and forged aluminum, the X0 is light enough to grace the fastest bikes out there. It's known for its precise, consistent function, efficient 1:1 exact actuation ratio and SRAM's Direct Route cable technology, all of which ensure that every single shift is crisp and lightning-fast. The roller bearing clutch keeps chain slap and derailleur bouncing at bay. Plus, with sealed bearings, this rear changer is built to last, too.
Shimano blows us away again with the XTR Shadow Plus 10-speed rear derailleur. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated anddropped chains are practically a thing of the past. Of course, it retains XTR's legendary smoothness, light action and super precise shifting. Once you ride a Plus derailleur, you'll never want to ride without it!
$259.99 - $264.00
A quiet bike is a beautiful thing. With SRAM's X0 Type 2 Rear Derailleur you'll hear the wind rushing past, the crunch of knobbies biting into dirt and the buzz of your freehub. SRAM's Type 2 technology eliminates chainslap, derailleur bounce, and other drivetrain racket. The roller bearing clutch keeps the chain tensioned for consistent shifting and is virtually maintenance free. The tech continues with an aluminum/composite construction, SRAM's 1:1 actuation ratio and direct cable routing for quick, reliable shifts. Plus, the Cage Lock feature gives you super easy rear wheel removal and installation.
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included
SRAM's renowned X0 Rear Derailleur is a rider's and racer's dream. Expertly crafted from carbon and forged aluminum, the X0 is light enough to grace the fastest bikes out there. It's known for its precise, consistent function, efficient 1:1 actuation ratio and SRAM's Direct Route cable technology, all of which ensure that every single shift is crisp and lightning-fast. Plus, with sealed bearings, this sweet rear changer is built to last, too.
Shimano's Dura-Ace Rear Derailleur boasts a light and reliable cold-forged-aluminum body with a carbon cage and a wide pivot design that boosts rigidity for smooth, speedy shifts. It has fluorine-coated pivots that minimize friction for nearly effortless shifting. The oversize sealed-bearing pulleys are silky smooth, ultra quiet, and keep out dirt and water. Plus, the 9000 accepts up to a 28-tooth cassette cog for even greater gearing possibilities.
Shimano's Dura-Ace Rear Derailleur boasts a light and reliable cold-forged-aluminum body with a carbon cage and a wide pivot design that boosts rigidity for smooth, speedy shifts. Fluorine-coated pivots minimize friction for nearly effortless shifting. And, the oversize sealed-bearing pulleys are silky smooth, ultra quiet, and keep out dirt and water. Plus, the 7900 accepts up to a 28-tooth cassette cog for even greater gearing possibilities.
$222.99 - $249.99
Shimano's electric-shifting 11-speed Ultegra Di2 Rear Derailleur is driven by battery power and a servo motor, so shifts are fast, precise, and perfect every time. It's made of light, tough cold-forged aluminum while mid-cage and short-cage models give you your choice of cassette. Since there aren't any cables or housing to stretch or fail, maintenance is dramatically reduced and shifting accuracy is unprecedented. This high-tech derailleur is even designed to move inward under impact to reduce the potential for damage in a crash.
SRAM adopted the brilliant 1x technology from its MTB brethren for the Force 1. This rear derailleur features SRAM's Exact Actuation technology for precision shifts every time, across all 11 gears. With a roller bearing clutch to control chain tension and an X-Sync chain pulley to control lateral movement, you get smooth, quiet, and secure shifting and operation on even the most intense cyclocross courses. - A dedicated 1x rear derailleur - Exact Actuation for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). 10 and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - CAGE LOCK technology makes for fast wheel changes or chain installation - Weight: 261 grams (medium cage) 271 grams (long cage) - Largest Cog (teeth): 36 (medium cage) 42 (long cage)
The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included
The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included
In the heat of competition, a missed shift can mean the difference between a podium place, and watching from the crowd. That's why Shimano builds the XTR Front Derailleur to exacting specifications. It boasts wide, sealed pivots for some of the smoothest off-road shifting you've ever experienced. This is an E-Type, top swing derailleur, meaning it mounts to the bottom bracket taking the guesswork out of derailleur mounting on full-suspension, carbon and non-standard frames.
In the heat of competition, a missed shift can mean the difference between a podium place, and watching from the sidelines. That's why Shimano builds the XTR Front Derailleur to exacting specifications. It boasts wide, sealed pivots for some of the smoothest off-road shifting you've ever experienced. The multiple clamp sizes (included) and variable cable routing give it super versatility.
- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm
Hear the wind rushing past, the crunch of knobbies biting into dirt and the buzz of your freehub with SRAM's X9 Rear Derailleur. SRAM's Type 2 technology eliminates chainslap, derailleur bounce, and other drivetrain racket. The roller bearing clutch keeps the chain tensioned for consistent shifting and is virtually maintenance free. The tech continues with an aluminum/composite construction, SRAM's 1:1 actuation ratio and direct cable routing for quick, reliable shifts. Plus, the Cage Lock feature gives you super easy rear wheel removal and installation.
SRAM's RED 22 Front Derailleur delivers precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. PaiRED with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.
$106.99 - $119.99
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
$99.99 - $119.99
Shimano's Ultegra Rear Derailleur benefits from trickle-down technology from Shimano's top-line Dura-Ace model, which means you get awesome shifting at a more affordable price point. This choice derailleur boasts a light and tough cold-forged-aluminum body with a wide pivot design that boosts rigidity to speed and smooth shifts. Plus, the fluorine-coated pivots minimize friction for nearly effortless shifting and the oversize pulleys keep the chain running more smoothly, too. The pulleys also last longer than smaller ones and are sealed to keep out water and dirt.
Page 1 of 4 Next page