Storage

Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). • The ES-1 adjusts from 94 to 120cm (37"-47") • Horizontal width (inside to inside): 2.23 meters (87")

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Garage floor space is precious. Saris’ CycleGlide offers an ingenious and elegant space-saving solution. You can store up to four bikes of virtually any size and shape thanks to its adjustable hooks. The gliding rails maximize storage room and allow easy access when you want to take a bike down to ride.

Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.

Gear Up's OakRak Floor-to-Ceiling Bike Storage Racks use their Smart Tension-mount design for installation between the floor and ceiling with ease (no permanent installation required). They're made of furniture-grade American red oak with a hand-rubbed oil stain and finish so they add class to any room and complement your bicycles. The solid-oak top plate uses compression foam at each corner to protect the ceiling, while the solid-oak base plate grips any surface for a tight fit between the floor and ceiling. The bikes are safely and securely held by their frames on vinyl coated-steel support arms that protect the paint and finish. There are Velcro straps included to secure the front wheel to the frame so that the wheel does not swing side to side during storage. The support arms also adjust independently up and down to hold any style of bike. This rack comes complete with everything to store/display two bikes.

Gear Up's OakRak Freestand Bike Storage Racks boast a compact 28-inch footprint to conserve space, so they're a great storage solution for home, office, or any location with dropped or angled ceilings. They're made of furniture-grade American red oak with a hand-rubbed oil stain and finish so they add class to any room and complement your bicycles. The bikes are safely and securely held by their frames on vinyl coated-steel support arms that protect the paint and finish. There are Velcro straps included to secure the front wheel to the frame so that the wheel does not swing side to side during storage. The support arms also adjust independently up and down to hold any style of bike. This rack comes complete with everything to store/display two bikes.

Topeak's Dual-Touch Bike Stand is a great way to display and store your prize two-wheelers whether you park it in your living room, the garage or the office. It's built of durable and attractive aluminum, is capable of holding up to 4 bicycles with additional bike mounts (2 bike mounts included) and features a quick-release height adjustment (the stand reaches up to 10.5 feet).

Freestanding two or four bike rack - Independent adjustable arms accommodate any bike style - Durable gray powder-coat finish - Easy to assemble - tools included - Max load 160 lbs (55kgs) - Dimensions: 24" x 24" x 86"

The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.

Saris' CycleGlide 2-Bike Add-On kit lets you hang two more bikes on your Saris CycleGlide overhead storage rack (sold separately).

Make the most of your space with Saris' Bike Bunk. It stores two bikes and adjusts to fit different bike styles and sizes. This free-standing mount features grippy, cushioned contact points that protect your floor and wall.

The Michelangelo gravity rack offers functional storage solutions in a contemporary art deco design. This unique product uses the force of gravity to harness superb support, reinforced by steel-tube construction. Rubber bumpers conveniently protect your walls and floor from scratches and scuff marks. This silver powder-coated bike storage rack will help you make the most efficient use of your valuable space. Looks great in any home or garage. Safely store your bikes with this new line of tough racks; sturdy large diameter tubing and extra padded support protect your favorite machines. - Leans against wall - No attachment required - Indpendent adjustable arms accomodate any bike style - Durable gray powder-coat finish - Easy to assemble - tools included - Maximum load 100 lbs (45 kgs) - Dimensions: 86 x 23.5 x 13.75 inches

Designed to elevate your bicycle to a piece of art, the Specialized wall display also features built-in platforms for your shoes and helmet. Formed from sheet aluminum, the display has a hidden steel support to provide stability, EVA foam pads to cradle the bike’s top tube, rubber feet to provide a secure placement on the wall, and a anodized black finish for durability. The display mounts via two screws to a solid load bearing structure. - Low-key design complements the bike. - Works with Tarmac, Venge, Roubaix, Amira, Allez, and other models with similar top tube slope and shape. - Holds bike, shoes, and helmet. - Easy to install.

The Saris Locking Bike Trac is a heavy-duty wall-mount bike rack that makes parking and displaying your bike simple. Plus, it even offers a 3/4-inch solid-steel locking loop that allows securing your bike with a U-lock (sold separately).

• Folds small and is lightweight for easy mobility • Holds bikes by rear axle with soft rubber-dipped fingers • Fits variety bikes with 20" – 29" tires, and is compatible with most disc brakes.

Burley's water-resistant Trailer Storage Cover keeps your trailer clean and ready to go when not in use.

Keep your garage organized or maximize your living space with Saris’ Bike Trac. A wide wheel track accepts most front and rear bike wheels, plus it's long enough to keep your bike securely in place and your walls protected. Mounting hardware is included.

Compatible with wheel/tire combinations having an overall height of 3.15" (8cm) and tire width up to 2.35" (approx 6.6cm). This elegant wall mounted bike holder allows you to store one bike and swing it to either side to optimize storage space. A molded rubber bar keeps the front wheel stationary, preventing the bike bike from twisting and includes all mounting hardware plus a molded rear wheel pad to prevent tire marks on the wall. Fits standard road and mountain bikes up to 29" wheels. Not compatible with fat tire bikes. - Added Features: Rotatable front wheel, Fixed bar - Attachment: Wall mount - Limitations: Compatible with wheel/tire combinations having an overall height of 8cm (3.15") and tire width up to 2.35" - Material: Aluminum / Plastic - Max Weight Capacity: 16 kg / 35 lb - Size: 27.5 x 16 x 7.7 cm / 10.8” x 6.3” x 3” - Weight: 845 grams / 1.86 lb

Topeak's Third Hook is the perfect addition to your Dual-Touch storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!

Elegant and functional, Topeak's OneUp is the perfect bicycle storage solution when space is an issue. It has a grooved, durable plastic tray and a molded rubber bar to keep your front wheel securely in place and it also boasts two storage hooks for your riding essentials and a rear wheel pad to keep your walls scuff free.

Topeak's Bike Cover makes it easy to keep your 27.5 or 29er dust free. It stretches to fit your bike and closes at the bottom with an elastic strap. Plus, the Bike Cover easily folds to a compact size and features a built-in bag for carrying and storage.

Delta's Monet Single Bike Rack isn't quite as still or life-y as Water Lilies, but it will display your beautiful bike like a work of art in between rides. - Folds down to save space when not in use - Convenient two point fixing (hardware included) - Rubber coated arms support bike - Durable steel construction finished in silver powdercoat - Max load 50 lbs - Dimensions Approx: 17.5" x 14.5" x 10.5" (D x W x H)

Topeak's Bike Cover makes it easy to keep your bike dust free. It stretches to fit your bike and closes at the bottom with an elastic strap. Plus, the Bike Cover easily folds to a compact size and features a built-in bag for carrying and storage.

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

- Rubber-coated arms support 2 bikes - Useful shelf for accessories that folds down to save space when not in use - Max. Load: 65lbs.

A shop grade floor stand that adjusts to any wheel size. - Extremely adjustable to securely hold any wheel size - Wide base with triangulated arms hold bikes firmly - Easy in-out for practical store use - Dimensions: 22 x 15 x 17" (560 x 380 x 430mm) - Tool-free adjustment with thumb screws - Rubberized feet protect floors

Feedback Sports' FATT RAKK Display Stand is an elegant solution for your fat bike. Set it down where you want it and roll your bike's rear wheel into the stand. That’s it! The 3-point contact locks in the wheel holding the bike upright. Simple and sweet, the RAKK works on any 3- to 5-inch wide tire without adjustment. It folds easily for storage when not in use. And, you can clip several RAKKs together to hold all your bikes side-by-side. Plus, this durable stand is made of steel and coated with durable powder paint for a lifetime of service.

Gear Up's Rack-n-Roll 1 Bike Stand is an elegant bike-parking solution that holds any bike upright and lets you easily move the bike around when it's parked, too. The specially shaped side bars provide stability while avoiding contact with derailleurs, disc brakes and axles. There are four small solid-plastic wheels on the bottom for rolling the rack around. And, because the stand offers adjustable settings from 1 to 5 inches wide, it will accept bikes with even the narrowest or widest tires. You can park bicycles by the front or rear wheel, which lets you line multiple bikes up more closely by putting every other one facing the opposite way (so the handlebars don't bump into each other).

- Welded construction with vinyl covered top-Tube hook - Storage shelf for gloves, Helmet, Etc - Arms fold up and out of the way when not in use - Powder coat black finish. Hardware included

A compact and economical solution to store your bike and optimize space usage. The Swing-Up EX allows you to swing your bike to either side and is compatible with wheel / tire combinations having an overall height of 3.15" (8cm) and tire width up to 2.35" (approx 6.6cm). - Attachments: Wall mount - Material: Aluminum / steel / engineering grade plastic - Max Weight Capacity: 16 kg / 35 lb - Added Features: Rotatable Front Wheel Fixed Bar - Compatibility: Compatible with wheel /tire combinations having an overall height up to 8cm (3.15”) and tire width up to 2.35” - Size: 22.7 x 7.5 x 5.3 cm / 8.9” x 2.9” x 2.1” - Weight: 950 grams / 2.09 lb