Tools/Maintenance

Sometimes the task at hand requires more hands than available. If you've ever worked with some of the more finicky bicycle brakes, you know what we are talking about. Pedro's Cable Puller (commonly known as the "Fourth Hand Tool") provides the perfect tool for tensioning brake or derailleur cables while making adjustments. Featuring one hand operation, ergonomic cushioned handles, and a thumb lock, this tool simultaneously grips and tensions the cable while keeping your other hand free to secure the cable in place. End the frustration and pick one up! Made from heat-treated laser-cut steel.

Periodic hydraulic damper bleeds are necessary to maintain consistent performance. RockShox's Charger Damper Bleed Kit has everything you need to keep your Charger-equipped fork charging hard.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Factory service kits for Reba A7 forks

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

- Foil sealed bottles to ensure freshness of fluid

- Specifically designed for changing brake lever blades on all MT series brakes

Lezyne's Classic Chain Rod is designed for heavy-duty use. Featuring a custom Lezyne chain that is easily replaced, this this tool is built to get the job done every time. The handle is made of varnished wood for strength and stylish good looks and there's an included bottle opener. Hang this beauty on your wall for all future cassette changes.

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Breathe new life into any Fox fork/shock seals - Fox's proprietary blend with anti-friction additives and molybdenum lubricates and protects seals - Use when rebuilding Fox suspension to lubricate foam rings and seals

- Concentrated degreaser and wash that cleans grime, oil and greases gently - Safe on all surfaces

Cutting hydraulic brake lines is quick, easy and precise with Jagwire's Sport Hydraulic Brake Line Cutter. The hand-held design makes it possible to expertly cut hydraulic lines on the workbench and on your bike.

Combining style, technology, and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features including an integrated, machined aluminum CO2 dispenser. The ergonomic side-plates are machined from lightweight aluminum, anodized black, and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. There are seven available configurations featuring up-to-date options for all modern bicycles, including gravel bikes, mountain bikes, e-bikes, and road bikes. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Weight: 158g Tool bits: - Quick link holder - Hex 2/2.5/3/4/5/6/8mm - Torx T10/T25 - Phillips - Chain breaker - 8/10mm wrench, 4 spoke wrenches - Disc brake wedge - Rotor truing tool - CO2 inflator

Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

7-Function Premium Multi-Tool - Micro Lever Compatible: Choose from five colors. - Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee™. - Hex Wrenches: 2, 3, 4, 5, 6mm. - T25 torx and Flat Blade screwdriver. - 70 grams. Rx Micro multi-tools deliver the perfect balance of size, weight, and function, ready for trailside repairs and daily adjustments. Designed for performance and durability with 6061 aluminum body, premium CrMo tool steel bits, and an anti-corrosion finish backed by our Rust-Free Guarantee™. Each new Rx Micro model now includes a 2mm hex wrench.

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.

Park's Side Cutter Pliers are professional quality, 7-inches long, and made from heat-treated, forged chromoly steel for crisp, easy cuts and durability. They boast soft-touch, dual-density handles for an excellent grip, too.

- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA) - Includes inside gauges for headtubes and cups and outside gauges for bearings

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

- External bottom bracket tool - For use with our 32mm CNC rod, an adjustable wrench, or 3/8" ratchet - External BB tool, 16 notch - 39mm, Shimano 9000, Dura Ace BB92, XTR BB93, Shimano crank dust cap tool, 16mm hex

- External bottom bracket tool - For use with our 32mm CNC rod, an adjustable wrench, or 3/8" ratchet - 16 notch, 44mm - Shimano BB80, BB5700, BB70, BB51, Enduro T47, Wheel's MFG T47, FSA, Hope, SRAM, Chris King, Race Face, (most common)

- External bottom bracket tool - For use with our 32mm CNC rod, an adjustable wrench, or 3/8" ratchet - 12 notch, 46mm - SRAM Dub, Race Face Cinch, Zipp, Rotor, BSA30, BB386, and more

Lezyne's Classic Pedal Rod is designed for heavy-duty use. Featuring two 15mm wrench openings with optimally positioned offsets, this wrench will loosen any pedal from its crank. The handle is made of varnished wood for strength and stylish good looks and there's an included bottle opener. Hang this beauty on your wall for all future pedal changes.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)