To gain every last bit of speed, Stan's pushes the limits of high strength and low weight with the carbon ZTR Valor 29 Front Wheel! One push on the pedals and you'll know why it's called Valor; you'll brave the descents like never before. When the trail tilts up, you'll feel like you have an "extra gear" on the climbs while you're dropping your fellow riders. The rim also uses Stan's BST technology for easy tubeless conversions, while the wide inner rim profiles and lowered sidewalls boost tire volume for enhanced traction. Plus, it's built with Stan's 3.30Ti hubs and Sapim spokes that keep the weight extra low.
Stan's NoTubes BST design creates a tight tubeless seal between the rim wall and tire bead. The inner rim wall is the same size and shape as the tire bead. It's also shorter, which increases the volume of the tire.
The Quick-Release/15mm front wheel gets two sets of axle end caps for use with quick-release skewers (shown) and for 15mm through-axles. Installation is as easy as putting the ones you need on the axle.
Recommended max rider weight: 230 pounds
|Rim Width||Internal: 21.3mm; External: 26.4mm|
|Hub(s)||Stan's 3.30Ti or Cannondale Lefty|
|Spokes (Front/Rear)||Sapim Laser|
|Axle(s)||Quick-release/15mm or Cannondale Lefty|
|Weight (Front/Rear)||610 grams|
|Extras||Stan's yellow rim tape and tubeless valve|
* Subject to change without notice.
|15mm / Quick-Release||847746007036||SWVA90001||210000047019|