650B

HG 1800 Spline wheels help you participate in rides again; commute to work, plan longer trips, or simply discover the joy of cycling. E-road bikes are there to assist riders to keep going. In doing so, the wheels undergo higher loads and torques on longer distances, due to the extra weight and power from the specific frame/motor constructions. Hybrid Road wheels are built to assist with these additional loads by increasing the strength of the individual components that make up the wheel. - Aluminum, sleeved rim joint rim - Hooked bead, tubeless ready - Inner width of 24 mm supports tires up to 50 mm - 25mm Rim Heightt - 370 Spline hub with 18T Ratchet LN System - DT Swiss tubeless ready tape installed, DT Swiss tubeless valve and valve guard included

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Wherever the trail leads, SRAM's Roam 30 is ready to go. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. And, the Roam's great features continue with SRAM's Solo Spoke design that uses one spoke length to fit the entire wheel, and quick-release skewer and 15mm thru-axle end caps that can be interchanged without tools.

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST: More than the strongest carbon wheelset in our known universe, Traverse HD i9 delivers unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on World Cup Downhill track. STRONG LIKE BULL (NO BULL): Our strongest rim shape, combined with off-set spoke drilling and molded with optimized carbon fiber for front and rear-specific characteristics, adds up to the strongest carbon trail wheels we have ever made. SMOOTH AND STRONG: The front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness and impact strength. HIGH PRECISION HANDLING: The fusion of control and durability—where stiffness meets grip, Traverse HD i9 glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS: Our U.S. patent pending Flat Top bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites.” AIR TIME: Thank our genius engineer, Chuck Teixeira, for inventing the “Roval ThreadBed Valve”—a valve that threads directly into the rim. This ingenious design eliminates compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. HIGH ENGAGEMENT: The i9 1/1 hub optimizes control via a dual-phased-pawl drive mechanism, accomplishing 90 points of engagement and 4° engagement by way of a six-pawl driver and 45-tooth drivering. The result is immediate power transfer from the pedals to the drivetrain, propelling riders forward with minimum lag. Perfect for ratcheting through techy sections. LIFETIME WARRANTY: On Roval Wheels when registered within the first 90 days of purchase. CRASH REPLACEMENT: 2-Year “It Happens” No Fault Crash Replacement—If you damage your Roval product while riding within the first two years of ownership and it’s not covered under warranty, we’ll still replace or repair it. “It Happens” is market-specific, and wheels must be registered. Please contact Rider Care in your Country for more details. DETAILS: - Rim: Traverse HD Asymmetric, Carbon, Front: 29" - Rear: 29'' and 27.5'', Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts, Compatible with Roval Threaded Valve Stem - Rim Details: 24mm Depth, 40mm External Width, 30mm Internal Width, 5mm Bead Width, Threaded Valve Insert - Hub: i9 1/1 J-Bend 6-bolt, Six pawl driver and 45 tooth drivering (4 degs) , 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light J-Bend, 29: Front: Two-cross (1:1) 28 count, R: 286, L: 282 - Rear: Two-cross (1:1) 32 count, DS: 287mm NDS: 287mm - 27.5: Rear: Two-cross (1:1) 32 count, DS: 268mm NDS: 269mm - Nipple: Sapim, Secure Lock Double Square, Alloy, 18mm - Tire Size: 2.3" - 2.6" - Max Pressure: 2.3-2.6'': 40 psi - Weight: Wheelset 1,830g, Front 812g, Rear 1018g (Including tubeless rim tape and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape, Threaded Valve Stem 37mm (Tire Insert Compatible), Spare Spoke & Nipple Kit, 31mm Endcaps, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Survival of the Strongest Traverse HD 240 DEG The Traverse HD is the strongest carbon trail wheel we’ve ever tested, engineered for those who live to send it—maybe harder than they should. Designed to handle big hits and rowdy lines, the Traverse HD 240 DEG is built to keep rolling no matter how hard you charge. At a Glance Use - Aggressive Trail, Enduro Weight (29") - 1,795 grams (with valves and tape) Front: 780g Rear: 1,015g Recommended Tires - Butcher and Eliminator Internal Width - 30mm Hub - DT Swiss 240 DEG 90 Teeth / 4 Degrees Spoke Count - 29 Front: 28H / 29 & 27.5 Rear: 32H Rear Hub - DT Swiss 240 J-Bend, 6-Bolt, 12x148mm

Just like mixing ketchup and mayonnaise to create the perfect french-fry accoutrement, the perfect wheelset may require combining seemingly disparate things. In this case, it's the venerable 30 SL and 30 HD, built into the respective front and rear wheels to provide the perfect combination of compliance and stiffness for your trail riding please. It's the wheelset ridden by many, and starting today, something that you can have to! By combining the 30 SL and 30 HD in a front and rear wheelset package, Reserve is giving you the inside line to the perfect trail bike wheelset. Stiff and compliant in equal measure, the Frysauce wheelset delivers just what you need, where you need it most. - Designed for trail riding - Carbon fiber construction with 3.6mm asymmetric offset, build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes - Lower profile for added lateral stiffness with increased vertical compliance, redesigned rim bed eases tubeless installation, with a shaped rim bed utilizing offset spoke holes that allows the tire to easily push past the bead bump to seat tubeless tires - 30mm inner width supports 2.2 to 2.5" tires - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty - Built with DT Swiss Hubs featuring DEG 90 points of engagement

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty