Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
Replacement lever blades for Magura disc brakes
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
Need to mount a light on your Old man Mountain rack? Well you're in luck! Here's a light mount that fits clip-on lights and lights with 50mm mount spacing.
- Powder-coated black, 6061 aluminum
Eliminate dropped chains forever with the new OneUp Components Bash Guide.
As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip
The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there.
NOT JUST FOR ENDURO RACERS.
The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention.
The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T.
FEATURES
- Tool less upper guide flip
- Install without removing your crank
- Single tool install and adjustment
- Boost compatible
- Oval Compatible
- Black Stainless Steel hardware
- Includes 3 bash plates (28-30T, 32-34T, 36T)
- Patented US 10,053,188 Other Patents Pending
SPECS
- Weight: 90g 28-30T, 105g 32-34T, 110g 36T
- Capacity: 28-36T
- Chainline: 7.5mm adjustment
- Mount: ISCG05
- Color: Black top guide piece included
- Material: 7075 aluminum, top guide glass reinforced thermoplastic
The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.
Allows for additional hand positions on long rides and during endurance events
- Superlight carbon construction, 98g with the provided stainless hardware
- Compatible with most 31.8mm diameter flat MTB and road handlebars
- Allows GPS and LED attachments
- Only requires 2.5~3Nm of torque when mounting to the handlebars
This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included.
- Material: alloy
- Includes top cap, bolt, and plastic cap
- Fits with 1-1/8" stems
- Weight: 8g
Securely mounts a Di2 battery inside a Ritchey seatpost (Di2 battery not included)
Keep it consistent with original Ritchey replacement parts. Compression cap features etched Ritchey logo.
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish.
- Bit Size: 4mm
- Thread Pitch: M5
- Length: 4x 16mm, 2x 18mm
SEATPOST SERVICE KIT - 200 HOUR/1 YEAR SERVICE (INCLUDES FOAM RING, COLLAR, INNER SEALHEAD BUSHING, & O-RING) - REVERB STEALTH C1
RockShox 32mm Seal Kit
RockShox 32mm Seal Kit
RockShox Lever Assemblies
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
- RockShox Reverb Stealth Short Hose Barb Assembly
Tellis Remote for Matchmaker Fuel
- Tellis dropper post remote lever features light action with a forged alloy design
- Fits 22.2mm diameter handlebars
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace 9001 STI levers
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set.
- OEM pulley set for XTR RD-M9000
- Sealed bearing guide & tension pulley
- Guide pulley with extra long teeth for increased chain control
These simple rear pegs are the easiest solution for passenger footrests. XL 100mm length is large enough for passenger feet of all sizes.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Haul ST and up to 2 pairs on Haul LT.
- 100mm long.
- Installation requires tools (not included).
*Not compatible with Rear Pannier adapters on the Haul ST due to shared mounting location.
An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup.
**For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Globe Haul ST and Haul LT.
- All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
This soft foam pad provides a comfortable seating solution for passengers of all ages. Tool-free attachment to the upper rack platform preserves the rack side rails for mounting additional accessories, such as pannier adapters.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Haul ST and Haul LT
- Reversible, asymmetric design allows for unlimited installation options.
- Hook-and-loop strap attachment for fast and secure installation.
- Up to 3 seats compatible with Haul LT.
- Aluminum collars feature angled slots.
- S-Works 32.6mm standard collar (14mm tall) fits all Specialized road frames with an aluminum outer seat tube sleeve
- S-Works 31.8mm standard collar (14mm tall) fits all Specialized road frames with a 31.8mm outer seat tube diameter
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit
- 21T Front Drive Cog
- 22T Rear Transfer Cog
- 24T Axle Drive Cog
- Cable stop required when installing on Sun Atlas Industrial Cargo Trike