Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

e*thirteen by The Hive XCX Chain Guide
$99.95
- XC or Cyclocross top guide, ideal for 1x drivetrains - ST and CX guides mount to 28.6, 31.8 and 34.9 seat tubes - E-Type guides fit Shimano E-Type and SRAM S3 frame mount standards
Wolf Tooth Components CAMO Chainring Bolt Kit
$5.00
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$54.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. BB Cup Spacers for Specialized Carbon Frame
$25.00
The Wheels Manufacturing 3.5mm Spacer Kit for 61mm Specialized OS Carbon Frame widens 61mm wide Specialized Carbon OSBB frame BB shells for use with Pressfit 30 bottom brackets. Place one 3.5mm BB cup spacer between each bottom bracket cup and the frame when installing the bottom bracket. Additional crank spindle spacers are included to fine-tune any crankset fitment play, and these spacers are machined from engineering-grade Delrin. Includes: - (2) - 3.5mm bottom bracket cup spacers (46mm ID) - (4) - .5mm crank spindle spacers (24mm ID) - (2) - 1.0mm crank spindle spacers (24mm ID)
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$42.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$54.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing Inc. BBright Adapter for 22/24mm Spindle Cranks
$54.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Wheels Manufacturing Inc. Crank Spindle Spacer
$11.50 - $11.99
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Freewheel/BB Spacer
$19.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Wheels Manufacturing Inc. Older Shimano Road Crank Fixing Bolt
$8.00
This Wheels Manufacturing Hollowtech II Crankarm Fixing Bolt For Late Model Shimano Road Cranks and LX keeps your Shimano crankset with 24mm spindle nice and snug. It is required to achieve perfect bottom bracket bearing preload.
Wheels Manufacturing Inc. PF30 Adapter for 22/24mm Spindle Cranks
$42.00
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. PF30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adapter for Campagnolo Ultra-Torque Cranks adapts Campagnolo Ultra-Torque cranks to PF30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr NOote: - PF30-CAMP was originally designed for use with SRAM PF30 bottom brackets with 6806 bearings installed. They will not work with newer SRAM PF30 bottom brackets that use a plastic insert that fits into the bearings and covers the outside of the bearings. - Will not work with Wheels Manufacturing PF30 Bottom Brackets.
Wheels Manufacturing Inc. Wheels Shimano Fixing Bolt
$8.00
- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
Sunlite Aluminum Crankarm (Left)
$15.99 - $16.99
• Square taper interface • Only includes left crank
Sunlite Aluminum ISIS Crankarm (Left)
$24.99
• ISIS interface • Only includes left crank • 175mm length
Sunlite Aluminum Low Profile Crankarm (Left)
$15.99 - $19.99
• Square taper interface • Only includes left crank • 175mm length
Sunlite Aluminum Low Profile Horizontal Square Crankarm (Left)
$19.99
- Horizontal square interface - Only includes left crank
Sunlite Aluminum OctaLink Crankarm (Left)
$24.99
• OctaLink interface • Only includes left crank • 175mm length
Sunlite One-Piece Crankarm
$17.99 - $19.99
- Forged steel - 24 TPI
Specialized Power Cranks Dura-Ace Dual
$1,500.00
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. And for all of you Dura-Ace fans out there, we've combined our extremely light power sensors with a Shimano Dura-Ace crankset to give you the most accurate and precise power meter available. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO - Independent, dual-leg power measurement - Works with ANT+ and Bluetooth devices - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available) - Available in 170-175mm crankarm lengths - All models include 52/36T chainrings
Specialized S-Works Carbon Mountain Crank Arms
$400.00
Sporting a supreme strength-to-weight ratio, Specialized's S-Works Carbon Mountain Crank Arms are super stiff and ready to propel you up the trails. With a self-extracting bolt for easy maintenance, these fourth-generation hollow crank arms feature an oversized aluminum spindle with a spline interface. It fits all frames with 73mm bottom bracket shell and includes all hardware for Pressfit 30.
Specialized S-Works Carbon Spider
$160.00
This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.
Specialized S-Works Power Cranks - Dual-Sided
$1,150.00
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. Lucky for you, Specialized has combined their incredibly light and stiff carbon fiber S-Works road cranks with dual-sided power measurement, making it the lightest (440g/172.5mm) and most accurate power meter available. The development of Power Cranks began with Specialized's Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, they found that neither of these methods answer the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, Specialized built their own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets them evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is their gold-standard for testing power meters, and through their testing and external validation from the Locomotion lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/-1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Independent, dual-leg power measurement. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Hollow carbon crankarms, carbon spider, and oversized alloy spindle offer superior stiffness and lighter weight than the competition—440 grams for 172.5mm crankarm length. - Fits Specialized road frames with OSBB or PF30 bottom bracket shell, as well as most BB30 road frames. - 110 BCD carbon spider (also compatible with 130 BCD carbon spider—sold separately). - Compatible with Shimano and SRAM drivetrains. Chainrings are sold separately. Use only with Specialized/Praxis chainrings 06217-1702 (52/36T) and 06218-1713 (50/34T). - Available in 165-180mm crankarm lengths.
Shimano 105 5800 Left Hand Crank Arm
$64.99
- Crank Construction : HOLLOWTECH II - Optimum power transfer
Shimano 105 Crankset
$159.99 - $199.99
For maximum pedaling efficiency, Shimano's 105 Crankset boasts light, stiff hollow cold forged aluminum arms, plus an integrated oversize-steel axle. The chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting. The asymmetrical, four-armed big chainring provides incredible power transfer.
Shimano Alivio Crankset
$72.99
Shimano's 9-sped Alivio crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. They are chainguard compatible, so if you're using these cranks on a commuter, your pant cuffs aren't in danger. Plus, the chainrings shift super-quick and precise.
Shimano Altus M311-L Crankset
$36.99 - $39.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
Page 1 of 3 Next page