Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
$6.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$9.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$10.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$19.99 - $24.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.99
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$19.99
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
$19.99 - $29.99
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$23.99 - $28.00
To keep your Avid Trail brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a retaining bolt are included (enough for one brake) in each pad set. And, there's an aluminum backing plate option if you're really counting the grams.
$25.00 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$26.99 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$32.99 - $44.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$44.00 - $54.99
Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.
$81.00 - $99.99
Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.
$89.99
When you’re tackling rough trails, very little affects your confidence and control more than your brakes. With increased negative volume to combat heat expansion, plus powerful larger-caliper pistons, Avid's DB3 gives you the power and modulation to up your dirt-shredding game. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 4 fluid for better heat dissipation and resistance to brake fade.
$95.00 - $97.00
Avid's Elixir 1 Hydraulic Disc Brake offers excellent power and modulation. Avid's Taperbore technology and Power Reserve Geometry deliver great control and lever feel. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 4 fluid for better heat dissipation and resistance to brake fade. Plus, the Elixir's unique integrated reservoir provides a major weight reduction and a sleek look. It even comes complete with Avid's 160mm CleanSweep rotor.
$109.99
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
$290.00
Take on bigger descents, nastier trails, higher speeds and brake later than ever with Avid's exceptional X0 Trail brakes. These powerful 4-piston brakes weigh in at near cross-country weights, and let you shed speed with authority. With Avid's Contact Point Adjustment, Power Reserve Geometry, and lever reach adjust it's simple and easy to choose between the modulation of a longer throw or the instantaneous power of a short throw. Combine that with Avid's Deep Stroke Modulation and TaperBore technology that gives you incredible control over these hugely powerful brakes and you have some of the most customizable, controllable stoppers around.
The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers
$41.45
2-piece center lock rotors for use with Campagnolo hydraulic brake systems. - Rounded external edge prevents cutting of skin in case of contact with rotor - Inner aluminum spider maximizes heat dissipation - EKAR rotors are strong 1.85mm thick stainless tempered steel - Strong, durable, light & resistant to corrosion Specifications: - Rotor Type: Two Piece - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds
$39.99
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
$315.00
The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT DIRECT MOUNT - 78.4 grams* (Front) - 78.2 grams* (Rear) *Pads not included WARRANTY - 3 Years
$315.00
The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT - 85.3 grams* (Front) - 83.7 grams* (Rear) * Pads not included
$25.99
Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon
$22.99
ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.
$22.99
These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.
$28.95 - $43.95
- Pad sets include pads and retraction spring for one caliper
Dominion replacement disc brake pads are used to maintain optimal performance with Hayes disc brakes.
$8.00 - $26.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
$9.99 - $52.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
$16.00 - $16.80
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
$38.99
The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.
$44.99
Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid
$25.00
Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle. - Includes barrel adjuster
Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Formula brakes and offer industry leading brake compounds for consistent, confident performance
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount
Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount
Disc brake pads with industry-leading compounds for consistent and confident performance, designed to fit a variety of Shimano brakes. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with Shimano Deore (T615, M525, M515), Alivio (M4050), Acera (M3050), Non-Series MT500, MT400, MT200, M575, M486, M485, M475, M465, M447, M446, M445, M416, M415, M395, M375, M365, M355, M315, UR300 - Compatible with TRP HY/RD (Post Mount), Hylex (Post Mount), Slate X2, Spyre, Spyke - Compatible with Tektro Aquila, Auriga, Dorado, Draco, Gemini, HD-E350, HD-E715, HD-M285, HD-M286, HD-T285, HDC330, Orion, Vela - Compatible with Promax F1, Solve, Lucid, Decode R, eCapsule, DSK-909
Disc brake pads with industry-leading compounds for consistent and confident performance, designed to fit a variety of Shimano brakes. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with Shimano XTR (M9120), Saint (M820, M810), Deore XT (M8120, M8020), SLX (M7120), Deore (M6120), ZEE (M640), Non-Series (MT520, MT420) - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate - Compatible with Tektro Orion 4-piston calipers
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate - Compatible with SRAM Code RSC (A1), Code R (B1), Guide RE; Avid Code (2011-2016)
$4.99
Our mountain rim brake pads are available both with a threaded or smooth post.
$6.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.
$12.99
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.
$12.99
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.
$14.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
$15.99 - $17.99
Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.
$15.99 - $22.00
Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.
$15.99 - $25.99
Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.
$17.99
Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.
$17.99 - $24.99
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate
$22.00
Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.
$25.99 - $31.99
Jagwire's Cross Pro Brake Pads use a combination of mountain and road brake-pad technologies for excellent speed control, stopping power and durability so they're ideal for cyclocross use. These brake pads are cartridge style for easy pad replacement without losing your brake shoe adjustment. And there are wheel guides to make wheel installation faster and easier. The Cross Pros are available in threaded or threadless (post-mount) versions to fit most bicycles.
$29.99
Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Magura disc brakes.
Page 1 of 4 Next page