- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Professional tools to correctly size spokes for wheelbuilding
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
High-quality L-key set with extra-short arm for use on difficult-to-access screws. For hexagon socket screws. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. Comes in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Extra-short arm for use on difficult-to-access screws - Hex-Plus allows socket head screws to live longer - The ballpoint on the long arm allows dependable working even in difficult situations - Chrome-plated for high corrosion protection - In a practical clip out of wear-free material
High-quality bit holder. Includes a ratchet: fine-toothing with a small return angle, switchover (right, fixed, left), maximum torque of up to 50 Newton meters. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits securely. - Ratcheting screwdriver with Rapidaptor technology for rapid bit change - Ratchet with fine-pitched toothing for a low return angle - Switchover right, fixed, left - Maximum torque of up to 50 Newton meters - Multi-component Kraftform handle for fast and ergonomic screwdriving - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their color coding and size markings. For hexagonal socket screws and Torx screws. In a robust and lightweight folding pouch. - L-key set for hexagonal socket screws and Torx screws - L-keys with Hex-Plus advantage for a longer screw life - L-keys are easy to find thanks to their wear-resistant size markings - In a practical, lightweight folding pouch for easy carrying
- Fits Truvativ GXP and Howitzer external-bearing bottom brackets with 16-spline/notched cups (also fits Shimano HollowTech-II bottom brackets) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces
You know that $300 carbon bar you just bought? Don't guess when installing it. Know exactly. Topeak's D-Torq is a precision digital torque wrench made from hardened steel. It features an audible alarm when you start to over tighten. The reversing rachet mechanism in the head has convenient thumb articulation and a range of 1-20 Nm. The LCD readout makes it easy to know exactly where you are and can calculate Nm/kg, Nm/cm, inch/lbs and foot/lbs.
You know that $300 carbon bar you just bought? Don't guess when tightening it. Know exactly. Topeak's D-Torq DX is a precision digital torque wrench made from hardened steel. It features an audible alarm when you hit your mark and when you start to over tighten. The reversing ratchet mechanism in the head has convenient thumb articulation and a range of 4-80 Nm. The LCD readout makes it easy to know exactly where you are and can calculate Nm/kg, Nm/cm, inch/lbs and foot/lbs.
The Surly Singleator Wrench is made from leftover stainless steel and serves two important functions: its 18mm wrench is perfect for adjusting the tension on your Singleator, and it opens bottles. Seriously. What a great way to reduce, reuse and recycle.
• For adding or replacing cage & rack mounts • Inserts are 10 to a bag • M5 x 12mm Alloy Insert
• For adding or replacing cage & rack mounts • Inserts are 10 to a bag • M5 x 12mm Steel Insert
• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan
• For adding or replacing cage & rack mounts • Inserts are 10 to a bag
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
- 5 DART plugs for use with the Stan's NoTubes DART tool
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Forged alloy body for the SWAT MTB Tool.
Replacement double-sided 4/5mm bit and long 4mm Roubaix/Tarmac bit for Specialized Torque Wrenches.
Specialized's EMT MTB Tire Levers give you the leverage to unseat the most stubborn tires. These super-durable tire levers have a metal insert for strength and a bottle opener on one end for a well-deserved post-maintenance beverage. And, both levers fit flush together with a magnet, so they are easily stowed in a bag or pocket.
Page 1 of 8 Next page