Parts & Accessories
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Upgrade any pump to the TwinHead pump head.
- Ball-inflating needle for footballs, basketballs and more
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
- Replaces well-used head and fittings and prolongs the life of your trusty floor pump - For 2010 floor pumps
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
- Head/Hose for Air Tool UHP pump
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original pump head o-ring, no problem, here's the replacement part to get you back up and running.
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
$4.95 - $5.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.
- Attaches to air compressor to inflate tires in seconds - Designed with a variable rate trigger and a large, easy to read gauge - Spin-on Presta head with pressure release option and USA-made hose are included with Prestaflator - Prestaflator PLUS includes Schrader head and blower tip - Attachments are 6061-T6 alloy
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
Specially built for inflating all bicycle tires and tubes, on all the different sizes and types of bike wheels, Park's Shop Inflator is a great shop-grade upgrade for your air compressor setup. For quick and easy inflating it has an ergonomic body for a sure grip, a 2-finger handle to control the air, and best of all, a small rotating head that's easy to fit between spokes, and that works on Schrader and Presta valves. Plus, you get an oversize, reinforced pressure gauge that reads from 0–220 psi (0–15 bars) and a pressure-release button for getting the psi exactly right. This fine inflator is built durably of quality materials throughout for everyday use in your shop and is rebuildable! It comes with a coupler plug compatible with most air hose quick-connect couplers. And it will accept any 1/4-inch National Pipe Thread fitting if you don't use a coupler.
Angled Presta valve adapter - Designed for disc wheel use
For all of the following models: - Carbon Drive Lite - Pressure Drive - Pressure Carbon Drive - Tech Drive HP - HP Drive - Sport Drive HP - Micro Floor Drive HP - Micro Floor Drive HPG - Swivel Drive HP
Lezyne's Valve Extenders are necessary for deep-section rims. They allow you to inflate and deflate tires easily, and feature wrench flats for simple tightening.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Don’t leave home without it. Genuine Innovations' Tire Repair & Inflation Wallet has everything you need to repair a flat tire, packed in a wallet that fits in a jersey pocket. No seat bag required. After patching your damaged tube, inflation is a breeze. Twist-to-inflate technology makes this easy to use. Fully controllable, just thread a cartridge onto the CO2 bicycle tire inflator, tighten until the cartridge is pierced, press the nozzle onto the valve, then twist the cartridge to release the gas into the tire. Takes only seconds to fill your tire and be back on the road. - Includes Microflate Nano CO2 inflator - Includes two 16 gram threaded CO2 cartridges - Includes one small patch kit & two tire levers - All packaged in a 3.5 x 4.5-inch nylon zippered wallet - Works with both Presta and Schrader valves - Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (each sold separately) - Construction: Glass reinforced nylon with brass internals. - Weight: 23 grams
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
Page 1 of 1